| Color: | More |
|---|---|
| Method: | Spray |
| Drying Method: | Drying |
Suppliers with verified business licenses
General Purpose Metallic
High temperature Fluorescent
It is suitable for various substrate,such as metal,wood,ceramic,plaster,glass,ABS plastic etc.
| Paint film | Uniform color,even and smooth |
| Touch free time | <10mins |
| Cure time | <60mins |
| Gloss(60°) | 69% |
| Hardness | 2H |
| Water resistance | Does change white,not bubble,non-shedding after 24 water soaking |
| Spray rate | 98.3% |
| Inner Pressure(25ºC) | 0.4MPa |
1.Make sure the surface is clean before use.
2.If the surface is rough,sand surface before use.
3.Shake the can for 2 minutes before using,until the liquid is mixed completely.
4.Before use,spray on a small area to see if the color is correct.
5.Spray at a distance of 15-30cm,and spray in a sweeping motion.
6.For better application,spray in 1-2minutes intervals,not all at once.
7.If there is a little bit left in can,rotate the nozzle 180°,then try again.
8.If cannot use all of it in one time,store in an upright position,press the nozzle for 3 seconds,and clear nozzle to avoid clogging.
9.Recommend to use within three years from date of manufacturing.In case of valve obstruction,remove nozzle and immerse it in thinner or acetone.Clear the hole with a needle,if required.
){kind=link}